dmesg - Sapphire AMD Radeon HD 6850
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.1 (root@Saturn) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 1 15:05:04 EET 2014
Command line: BOOT_IMAGE=../vmlinuz-linux64bit3.13.1 root=/dev/sda4 ro initrd=../initramfs-64bit313-1.img
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data
BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffcffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002afffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A79 Deluxe, BIOS 4101 04/13/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2b0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000002b0000000 aka 11008M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0218d000, 0x0218dfff] PGTABLE
BRK [0x0218e000, 0x0218efff] PGTABLE
BRK [0x0218f000, 0x0218ffff] PGTABLE
init_memory_mapping: [mem 0x2afe00000-0x2afffffff]
[mem 0x2afe00000-0x2afffffff] page 2M
BRK [0x02190000, 0x02190fff] PGTABLE
init_memory_mapping: [mem 0x2ac000000-0x2afdfffff]
[mem 0x2ac000000-0x2afdfffff] page 2M
init_memory_mapping: [mem 0x280000000-0x2abffffff]
[mem 0x280000000-0x2abffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff8ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x27fffffff]
[mem 0x100000000-0x27fffffff] page 1G
RAMDISK: [mem 0x7f8e4000-0x7fffffff]
ACPI: RSDP 00000000000fb860 000024 (v02 ACPIAM)
ACPI: XSDT 00000000cff90100 00005C (v01 041311 XSDT1048 20110413 MSFT 00000097)
ACPI: FACP 00000000cff90290 0000F4 (v03 041311 FACP1048 20110413 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000cff90450 00E5A8 (v01 A1161 A1161000 00000000 INTL 20060113)
ACPI: FACS 00000000cffa8000 000040
ACPI: APIC 00000000cff90390 00007C (v01 041311 APIC1048 20110413 MSFT 00000097)
ACPI: MCFG 00000000cff90410 00003C (v01 041311 OEMMCFG 20110413 MSFT 00000097)
ACPI: OEMB 00000000cffa8040 000072 (v01 041311 OEMB1048 20110413 MSFT 00000097)
ACPI: SRAT 00000000cff9f450 0000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 00000000cff9f540 000038 (v01 041311 OEMHPET 20110413 MSFT 00000097)
ACPI: SSDT 00000000cff9f580 000544 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x2afffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x2afffffff] -> [mem 0x00000000-0x2afffffff]
Initmem setup node 0 [mem 0x00000000-0x2afffffff]
NODE_DATA [mem 0x2affd7000-0x2afffdfff]
[ffffea0000000000-ffffea000abfffff] PMD -> [ffff8802a5600000-ffff8802af5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x2afffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcff8ffff]
node 0: [mem 0x100000000-0x2afffffff]
On node 0 totalpages: 2621230
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847760 pages, LIFO batch:31
Normal zone: 27648 pages used for memmap
Normal zone: 1769472 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0xd0000000-0xffefffff] available for PCI devices
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8802afc00000 s80448 r8192 d21952 u262144
pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2580250
Policy zone: Normal
Kernel command line: BOOT_IMAGE=../vmlinuz-linux64bit3.13.1 root=/dev/sda4 ro initrd=../initramfs-64bit313-1.img
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 10228700K/10484920K available (6534K kernel code, 1392K rwdata, 3172K rodata, 1636K init, 2616K bss, 256220K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
NR_IRQS:524544 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 2809.484 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5621.09 BogoMIPS (lpj=9364946)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (ffffffff81ef7000 - ffffffff81efe000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25647 entries in 101 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Phenom(tm) 9850 Quad-Core Processor (fam: 10, model: 02, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
process: Switch to broadcast mode on CPU1
process: Switch to broadcast mode on CPU2
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (22484.36 BogoMIPS)
process: Switch to broadcast mode on CPU3
devtmpfs: initialized
device: 'platform': device_add
PM: Adding info for No Bus:platform
bus: 'platform': registered
bus: 'cpu': registered
device: 'cpu': device_add
PM: Adding info for No Bus:cpu
PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffcffff] (163840 bytes)
bus: 'workqueue': registered
device: 'workqueue': device_add
PM: Adding info for No Bus:workqueue
xor: measuring software checksum speed
prefetch64-sse: 11756.400 MB/sec
generic_sse: 10959.600 MB/sec
xor: using function: prefetch64-sse (11756.400 MB/sec)
pinctrl core: initialized pinctrl subsystem
device class 'regulator': registering
Registering platform device 'reg-dummy'. Parent at platform
device: 'reg-dummy': device_add
bus: 'platform': add device reg-dummy
PM: Adding info for platform:reg-dummy
bus: 'platform': add driver reg-dummy
bus: 'platform': driver_probe_device: matched device reg-dummy with driver reg-dummy
bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
reg-dummy reg-dummy: no default pinctrl state
device: 'regulator.0': device_add
PM: Adding info for No Bus:regulator.0
regulator-dummy: no parameters
driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
NET: Registered protocol family 16
device class 'bdi': registering
device class 'gpio': registering
device class 'pci_bus': registering
bus: 'pci': registered
device: 'rapidio': device_add
PM: Adding info for No Bus:rapidio
bus: 'rapidio': registered
device class 'lcd': registering
device class 'backlight': registering
device class 'tty': registering
device class 'vtconsole': registering
device: 'vtcon0': device_add
PM: Adding info for No Bus:vtcon0
bus: 'node': registered
device: 'node': device_add
PM: Adding info for No Bus:node
bus: 'platform': add driver sram
bus: 'platform': add driver syscon
bus: 'spi': registered
device class 'spi_master': registering
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 00000002b0000000 aka 11008M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x2b0000000-0xfcffffffff]
ACPI: bus type PCI registered
device class 'dma': registering
device class 'dmi': registering
device: 'id': device_add
PM: Adding info for No Bus:id
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
device: 'node0': device_add
bus: 'node': add device node0
PM: Adding info for node:node0
device: 'cpu0': device_add
bus: 'cpu': add device cpu0
PM: Adding info for cpu:cpu0
device: 'cpu1': device_add
bus: 'cpu': add device cpu1
PM: Adding info for cpu:cpu1
device: 'cpu2': device_add
bus: 'cpu': add device cpu2
PM: Adding info for cpu:cpu2
device: 'cpu3': device_add
bus: 'cpu': add device cpu3
PM: Adding info for cpu:cpu3
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
device: 'writeback': device_add
bus: 'workqueue': add device writeback
PM: Adding info for workqueue:writeback
device: 'default': device_add
PM: Adding info for No Bus:default
bio: create slab at 0
device class 'block': registering
raid6: sse2x1 3609 MB/s
raid6: sse2x2 6162 MB/s
raid6: sse2x4 6844 MB/s
raid6: using algorithm sse2x4 (6844 MB/s)
raid6: using intx1 recovery algorithm
bus: 'platform': add driver byt_gpio
bus: 'platform': add driver lp_gpio
bus: 'platform': add driver stmpe-gpio
device class 'graphics': registering
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
bus: 'acpi': registered
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
bus: 'platform': add driver clk-lpt
ACPI: No dock devices found.
device: 'LNXSYSTM:00': device_add
bus: 'acpi': add device LNXSYSTM:00
PM: Adding info for acpi:LNXSYSTM:00
device: 'LNXCPU:00': device_add
bus: 'acpi': add device LNXCPU:00
PM: Adding info for acpi:LNXCPU:00
device: 'LNXCPU:01': device_add
bus: 'acpi': add device LNXCPU:01
PM: Adding info for acpi:LNXCPU:01
device: 'LNXCPU:02': device_add
bus: 'acpi': add device LNXCPU:02
PM: Adding info for acpi:LNXCPU:02
device: 'LNXCPU:03': device_add
bus: 'acpi': add device LNXCPU:03
PM: Adding info for acpi:LNXCPU:03
device: 'LNXCPU:04': device_add
bus: 'acpi': add device LNXCPU:04
PM: Adding info for acpi:LNXCPU:04
device: 'LNXCPU:05': device_add
bus: 'acpi': add device LNXCPU:05
PM: Adding info for acpi:LNXCPU:05
device: 'device:00': device_add
bus: 'acpi': add device device:00
PM: Adding info for acpi:device:00
device: 'PNP0A03:00': device_add
bus: 'acpi': add device PNP0A03:00
PM: Adding info for acpi:PNP0A03:00
device: 'device:01': device_add
bus: 'acpi': add device device:01
PM: Adding info for acpi:device:01
device: 'device:02': device_add
bus: 'acpi': add device device:02
PM: Adding info for acpi:device:02
device: 'device:03': device_add
bus: 'acpi': add device device:03
PM: Adding info for acpi:device:03
device: 'device:04': device_add
bus: 'acpi': add device device:04
PM: Adding info for acpi:device:04
device: 'device:05': device_add
bus: 'acpi': add device device:05
PM: Adding info for acpi:device:05
device: 'device:06': device_add
bus: 'acpi': add device device:06
PM: Adding info for acpi:device:06
device: 'device:07': device_add
bus: 'acpi': add device device:07
PM: Adding info for acpi:device:07
device: 'device:08': device_add
bus: 'acpi': add device device:08
PM: Adding info for acpi:device:08
device: 'device:09': device_add
bus: 'acpi': add device device:09
PM: Adding info for acpi:device:09
device: 'device:0a': device_add
bus: 'acpi': add device device:0a
PM: Adding info for acpi:device:0a
device: 'device:0b': device_add
bus: 'acpi': add device device:0b
PM: Adding info for acpi:device:0b
device: 'device:0c': device_add
bus: 'acpi': add device device:0c
PM: Adding info for acpi:device:0c
device: 'device:0d': device_add
bus: 'acpi': add device device:0d
PM: Adding info for acpi:device:0d
device: 'device:0e': device_add
bus: 'acpi': add device device:0e
PM: Adding info for acpi:device:0e
device: 'device:0f': device_add
bus: 'acpi': add device device:0f
PM: Adding info for acpi:device:0f
device: 'device:10': device_add
bus: 'acpi': add device device:10
PM: Adding info for acpi:device:10
device: 'device:11': device_add
bus: 'acpi': add device device:11
PM: Adding info for acpi:device:11
device: 'device:12': device_add
bus: 'acpi': add device device:12
PM: Adding info for acpi:device:12
device: 'device:13': device_add
bus: 'acpi': add device device:13
PM: Adding info for acpi:device:13
device: 'device:14': device_add
bus: 'acpi': add device device:14
PM: Adding info for acpi:device:14
device: 'device:15': device_add
bus: 'acpi': add device device:15
PM: Adding info for acpi:device:15
device: 'PNP0000:00': device_add
bus: 'acpi': add device PNP0000:00
PM: Adding info for acpi:PNP0000:00
device: 'PNP0200:00': device_add
bus: 'acpi': add device PNP0200:00
PM: Adding info for acpi:PNP0200:00
device: 'PNP0100:00': device_add
bus: 'acpi': add device PNP0100:00
PM: Adding info for acpi:PNP0100:00
device: 'PNP0B00:00': device_add
bus: 'acpi': add device PNP0B00:00
PM: Adding info for acpi:PNP0B00:00
device: 'PNP0800:00': device_add
bus: 'acpi': add device PNP0800:00
PM: Adding info for acpi:PNP0800:00
device: 'PNP0C04:00': device_add
bus: 'acpi': add device PNP0C04:00
PM: Adding info for acpi:PNP0C04:00
device: 'ATK0110:00': device_add
bus: 'acpi': add device ATK0110:00
PM: Adding info for acpi:ATK0110:00
device: 'PNP0103:00': device_add
bus: 'acpi': add device PNP0103:00
PM: Adding info for acpi:PNP0103:00
device: 'PNP0C02:00': device_add
bus: 'acpi': add device PNP0C02:00
PM: Adding info for acpi:PNP0C02:00
device: 'PNP0C02:01': device_add
bus: 'acpi': add device PNP0C02:01
PM: Adding info for acpi:PNP0C02:01
device: 'PNP0303:00': device_add
bus: 'acpi': add device PNP0303:00
PM: Adding info for acpi:PNP0303:00
device: 'PNP0C02:02': device_add
bus: 'acpi': add device PNP0C02:02
PM: Adding info for acpi:PNP0C02:02
device: 'PNP0C02:03': device_add
bus: 'acpi': add device PNP0C02:03
PM: Adding info for acpi:PNP0C02:03
device: 'device:16': device_add
bus: 'acpi': add device device:16
PM: Adding info for acpi:device:16
device: 'device:17': device_add
bus: 'acpi': add device device:17
PM: Adding info for acpi:device:17
device: 'device:18': device_add
bus: 'acpi': add device device:18
PM: Adding info for acpi:device:18
device: 'device:19': device_add
bus: 'acpi': add device device:19
PM: Adding info for acpi:device:19
device: 'device:1a': device_add
bus: 'acpi': add device device:1a
PM: Adding info for acpi:device:1a
device: 'device:1b': device_add
bus: 'acpi': add device device:1b
PM: Adding info for acpi:device:1b
device: 'device:1c': device_add
bus: 'acpi': add device device:1c
PM: Adding info for acpi:device:1c
device: 'device:1d': device_add
bus: 'acpi': add device device:1d
PM: Adding info for acpi:device:1d
device: 'device:1e': device_add
bus: 'acpi': add device device:1e
PM: Adding info for acpi:device:1e
device: 'PNP0C01:00': device_add
bus: 'acpi': add device PNP0C01:00
PM: Adding info for acpi:PNP0C01:00
device: 'PNP0C0C:00': device_add
bus: 'acpi': add device PNP0C0C:00
PM: Adding info for acpi:PNP0C0C:00
device: 'PNP0C0F:00': device_add
bus: 'acpi': add device PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:00
device: 'PNP0C0F:01': device_add
bus: 'acpi': add device PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:01
device: 'PNP0C0F:02': device_add
bus: 'acpi': add device PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:02
device: 'PNP0C0F:03': device_add
bus: 'acpi': add device PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:03
device: 'PNP0C0F:04': device_add
bus: 'acpi': add device PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:04
device: 'PNP0C0F:05': device_add
bus: 'acpi': add device PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:05
device: 'PNP0C0F:06': device_add
bus: 'acpi': add device PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:06
device: 'PNP0C0F:07': device_add
bus: 'acpi': add device PNP0C0F:07
PM: Adding info for acpi:PNP0C0F:07
device: 'device:1f': device_add
bus: 'acpi': add device device:1f
PM: Adding info for acpi:device:1f
device: 'PNP0C14:00': device_add
bus: 'acpi': add device PNP0C14:00
PM: Adding info for acpi:PNP0C14:00
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
device: 'pci0000:00': device_add
PM: Adding info for No Bus:pci0000:00
device: '0000:00': device_add
PM: Adding info for No Bus:0000:00
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
device: '0000:00:00.0': device_add
bus: 'pci': add device 0000:00:00.0
PM: Adding info for pci:0000:00:00.0
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
device: '0000:00:02.0': device_add
pci 0000:00:02.0: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:02.0
PM: Adding info for pci:0000:00:02.0
pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
device: '0000:00:06.0': device_add
pci 0000:00:06.0: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:06.0
PM: Adding info for pci:0000:00:06.0
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbdfe400-0xfbdfe7ff]
device: '0000:00:11.0': device_add
bus: 'pci': add device 0000:00:11.0
PM: Adding info for pci:0000:00:11.0
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbdfa000-0xfbdfafff]
device: '0000:00:12.0': device_add
pci 0000:00:12.0: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:12.0
PM: Adding info for pci:0000:00:12.0
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfbdfb000-0xfbdfbfff]
device: '0000:00:12.1': device_add
pci 0000:00:12.1: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:12.1
PM: Adding info for pci:0000:00:12.1
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbdfe800-0xfbdfe8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
device: '0000:00:12.2': device_add
pci 0000:00:12.2: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:12.2
PM: Adding info for pci:0000:00:12.2
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbdfc000-0xfbdfcfff]
device: '0000:00:13.0': device_add
pci 0000:00:13.0: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:13.0
PM: Adding info for pci:0000:00:13.0
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbdfd000-0xfbdfdfff]
device: '0000:00:13.1': device_add
pci 0000:00:13.1: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:13.1
PM: Adding info for pci:0000:00:13.1
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbdfec00-0xfbdfecff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
device: '0000:00:13.2': device_add
pci 0000:00:13.2: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:13.2
PM: Adding info for pci:0000:00:13.2
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
device: '0000:00:14.0': device_add
bus: 'pci': add device 0000:00:14.0
PM: Adding info for pci:0000:00:14.0
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
device: '0000:00:14.1': device_add
bus: 'pci': add device 0000:00:14.1
PM: Adding info for pci:0000:00:14.1
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
device: '0000:00:14.3': device_add
bus: 'pci': add device 0000:00:14.3
PM: Adding info for pci:0000:00:14.3
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
device: '0000:00:14.4': device_add
pci 0000:00:14.4: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:14.4
PM: Adding info for pci:0000:00:14.4
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbdff000-0xfbdfffff]
device: '0000:00:14.5': device_add
pci 0000:00:14.5: System wakeup disabled by ACPI
bus: 'pci': add device 0000:00:14.5
PM: Adding info for pci:0000:00:14.5
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
device: '0000:00:18.0': device_add
bus: 'pci': add device 0000:00:18.0
PM: Adding info for pci:0000:00:18.0
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
device: '0000:00:18.1': device_add
bus: 'pci': add device 0000:00:18.1
PM: Adding info for pci:0000:00:18.1
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
device: '0000:00:18.2': device_add
bus: 'pci': add device 0000:00:18.2
PM: Adding info for pci:0000:00:18.2
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
device: '0000:00:18.3': device_add
bus: 'pci': add device 0000:00:18.3
PM: Adding info for pci:0000:00:18.3
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
device: '0000:00:18.4': device_add
bus: 'pci': add device 0000:00:18.4
PM: Adding info for pci:0000:00:18.4
device: '0000:03': device_add
PM: Adding info for No Bus:0000:03
pci 0000:03:00.0: [1002:6739] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfbfc0000-0xfbfdffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbfa0000-0xfbfbffff pref]
pci 0000:03:00.0: supports D1 D2
device: '0000:03:00.0': device_add
bus: 'pci': add device 0000:03:00.0
PM: Adding info for pci:0000:03:00.0
pci 0000:03:00.1: [1002:aa88] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff 64bit]
pci 0000:03:00.1: supports D1 D2
device: '0000:03:00.1': device_add
bus: 'pci': add device 0000:03:00.1
PM: Adding info for pci:0000:03:00.1
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
device: '0000:02': device_add
PM: Adding info for No Bus:0000:02
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
device: '0000:02:00.0': device_add
bus: 'pci': add device 0000:02:00.0
PM: Adding info for pci:0000:02:00.0
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
device: '0000:01': device_add
PM: Adding info for No Bus:0000:01
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
device: 'LNXPWRBN:00': device_add
bus: 'acpi': add device LNXPWRBN:00
PM: Adding info for acpi:LNXPWRBN:00
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
bus: 'acpi': add driver ec
bus: 'pnp': registered
device class 'misc': registering
device: 'vga_arbiter': device_add
PM: Adding info for No Bus:vga_arbiter
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
bus: 'spi': add driver stmpe-spi
bus: 'spi': add driver wm831x
bus: 'spi': add driver tps65912
bus: 'spi': add driver ezx-pcap
bus: 'spi': add driver da9052
device class 'scsi_host': registering
bus: 'scsi': registered
device class 'scsi_device': registering
SCSI subsystem initialized
device class 'ata_link': registering
device class 'ata_port': registering
device class 'ata_device': registering
libata version 3.00 loaded.
device class 'mdio_bus': registering
bus: 'mdio_bus': registered
bus: 'mdio_bus': add driver Generic PHY
device class 'udc': registering
bus: 'serio': registered
device class 'input': registering
device class 'rtc': registering
device class 'power_supply': registering
device class 'hwmon': registering
device class 'watchdog': registering
device class 'leds': registering
device class 'wmi': registering
bus: 'acpi': add driver wmi
bus: 'acpi': driver_probe_device: matched device PNP0C14:00 with driver wmi
bus: 'acpi': really_probe: probing driver wmi with device PNP0C14:00
wmi PNP0C14:00: no default pinctrl state
device: 'ABBC0F6A-8EA1-11D1-00A0-C90629100000': device_add
PM: Adding info for No Bus:ABBC0F6A-8EA1-11D1-00A0-C90629100000
device: '05901221-D566-11D1-B2F0-00A0C9062910': device_add
PM: Adding info for No Bus:05901221-D566-11D1-B2F0-00A0C9062910
driver: 'PNP0C14:00': driver_bound: bound to device 'wmi'
bus: 'acpi': really_probe: bound device PNP0C14:00 to driver wmi
wmi: Mapper loaded
device class 'devfreq': registering
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
device class 'net': registering
device: 'lo': device_add
PM: Adding info for No Bus:lo
NET: Registered protocol family 23
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
bus: 'pnp': add driver system
pnp: PnP ACPI init
device: 'pnp0': device_add
PM: Adding info for No Bus:pnp0
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
device: '00:00': device_add
bus: 'pnp': add device 00:00
PM: Adding info for pnp:00:00
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
device: '00:01': device_add
bus: 'pnp': add device 00:01
PM: Adding info for pnp:00:01
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
device: '00:02': device_add
bus: 'pnp': add device 00:02
PM: Adding info for pnp:00:02
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
device: '00:03': device_add
bus: 'pnp': add device 00:03
PM: Adding info for pnp:00:03
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
device: '00:04': device_add
bus: 'pnp': add device 00:04
PM: Adding info for pnp:00:04
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
device: '00:05': device_add
bus: 'pnp': add device 00:05
PM: Adding info for pnp:00:05
bus: 'pnp': driver_probe_device: matched device 00:05 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:05
system 00:05: no default pinctrl state
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
driver: '00:05': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:05 to driver system
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
device: '00:06': device_add
bus: 'pnp': add device 00:06
PM: Adding info for pnp:00:06
bus: 'pnp': driver_probe_device: matched device 00:06 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:06
system 00:06: no default pinctrl state
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0b00-0x0b3f] has been reserved
system 00:06: [io 0x0800-0x089f] could not be reserved
system 00:06: [io 0x0b00-0x0b0f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [io 0xfe00-0xfefe] has been reserved
system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved
driver: '00:06': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:06 to driver system
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
device: '00:07': device_add
bus: 'pnp': add device 00:07
PM: Adding info for pnp:00:07
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
device: '00:08': device_add
bus: 'pnp': add device 00:08
PM: Adding info for pnp:00:08
bus: 'pnp': driver_probe_device: matched device 00:08 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:08
system 00:08: no default pinctrl state
system 00:08: [io 0x0230-0x023f] has been reserved
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x0f40-0x0f4f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
driver: '00:08': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:08 to driver system
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
device: '00:09': device_add
bus: 'pnp': add device 00:09
PM: Adding info for pnp:00:09
bus: 'pnp': driver_probe_device: matched device 00:09 with driver system
bus: 'pnp': really_probe: probing driver system with device 00:09
system 00:09: no default pinctrl state
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
driver: '00:09': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:09 to driver system
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
device: '00:0a': device_add
bus: 'pnp': add device 00:0a
PM: Adding info for pnp:00:0a
bus: 'pnp': driver_probe_device: matched device 00:0a with driver system
bus: 'pnp': really_probe: probing driver system with device 00:0a
system 00:0a: no default pinctrl state
system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
driver: '00:0a': driver_bound: bound to device 'system'
bus: 'pnp': really_probe: bound device 00:0a to driver system
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
device class 'mem': registering
device: 'mem': device_add
PM: Adding info for No Bus:mem
device: 'kmem': device_add
PM: Adding info for No Bus:kmem
device: 'null': device_add
PM: Adding info for No Bus:null
device: 'port': device_add
PM: Adding info for No Bus:port
device: 'zero': device_add
PM: Adding info for No Bus:zero
device: 'full': device_add
PM: Adding info for No Bus:full
device: 'random': device_add
PM: Adding info for No Bus:random
device: 'urandom': device_add
PM: Adding info for No Bus:urandom
device: 'kmsg': device_add
PM: Adding info for No Bus:kmsg
device: 'tty': device_add
PM: Adding info for No Bus:tty
device: 'console': device_add
PM: Adding info for No Bus:console
device: 'tty0': device_add
PM: Adding info for No Bus:tty0
device class 'vc': registering
device: 'vcs': device_add
PM: Adding info for No Bus:vcs
device: 'vcsa': device_add
PM: Adding info for No Bus:vcsa
device: 'vcs1': device_add
PM: Adding info for No Bus:vcs1
device: 'vcsa1': device_add
PM: Adding info for No Bus:vcsa1
device: 'tty1': device_add
PM: Adding info for No Bus:tty1
device: 'tty2': device_add
PM: Adding info for No Bus:tty2
device: 'tty3': device_add
PM: Adding info for No Bus:tty3
device: 'tty4': device_add
PM: Adding info for No Bus:tty4
device: 'tty5': device_add
PM: Adding info for No Bus:tty5
device: 'tty6': device_add
PM: Adding info for No Bus:tty6
device: 'tty7': device_add
PM: Adding info for No Bus:tty7
device: 'tty8': device_add
PM: Adding info for No Bus:tty8
device: 'tty9': device_add
PM: Adding info for No Bus:tty9
device: 'tty10': device_add
PM: Adding info for No Bus:tty10
device: 'tty11': device_add
PM: Adding info for No Bus:tty11
device: 'tty12': device_add
PM: Adding info for No Bus:tty12
device: 'tty13': device_add
PM: Adding info for No Bus:tty13
device: 'tty14': device_add
PM: Adding info for No Bus:tty14
device: 'tty15': device_add
PM: Adding info for No Bus:tty15
device: 'tty16': device_add
PM: Adding info for No Bus:tty16
device: 'tty17': device_add
PM: Adding info for No Bus:tty17
device: 'tty18': device_add
PM: Adding info for No Bus:tty18
device: 'tty19': device_add
PM: Adding info for No Bus:tty19
device: 'tty20': device_add
PM: Adding info for No Bus:tty20
device: 'tty21': device_add
PM: Adding info for No Bus:tty21
device: 'tty22': device_add
PM: Adding info for No Bus:tty22
device: 'tty23': device_add
PM: Adding info for No Bus:tty23
device: 'tty24': device_add
PM: Adding info for No Bus:tty24
device: 'tty25': device_add
PM: Adding info for No Bus:tty25
device: 'tty26': device_add
PM: Adding info for No Bus:tty26
device: 'tty27': device_add
PM: Adding info for No Bus:tty27
device: 'tty28': device_add
PM: Adding info for No Bus:tty28
device: 'tty29': device_add
PM: Adding info for No Bus:tty29
device: 'tty30': device_add
PM: Adding info for No Bus:tty30
device: 'tty31': device_add
PM: Adding info for No Bus:tty31
device: 'tty32': device_add
PM: Adding info for No Bus:tty32
device: 'tty33': device_add
PM: Adding info for No Bus:tty33
device: 'tty34': device_add
PM: Adding info for No Bus:tty34
device: 'tty35': device_add
PM: Adding info for No Bus:tty35
device: 'tty36': device_add
PM: Adding info for No Bus:tty36
device: 'tty37': device_add
PM: Adding info for No Bus:tty37
device: 'tty38': device_add
PM: Adding info for No Bus:tty38
device: 'tty39': device_add
PM: Adding info for No Bus:tty39
device: 'tty40': device_add
PM: Adding info for No Bus:tty40
device: 'tty41': device_add
PM: Adding info for No Bus:tty41
device: 'tty42': device_add
PM: Adding info for No Bus:tty42
device: 'tty43': device_add
PM: Adding info for No Bus:tty43
device: 'tty44': device_add
PM: Adding info for No Bus:tty44
device: 'tty45': device_add
PM: Adding info for No Bus:tty45
device: 'tty46': device_add
PM: Adding info for No Bus:tty46
device: 'tty47': device_add
PM: Adding info for No Bus:tty47
device: 'tty48': device_add
PM: Adding info for No Bus:tty48
device: 'tty49': device_add
PM: Adding info for No Bus:tty49
device: 'tty50': device_add
PM: Adding info for No Bus:tty50
device: 'tty51': device_add
PM: Adding info for No Bus:tty51
device: 'tty52': device_add
PM: Adding info for No Bus:tty52
device: 'tty53': device_add
PM: Adding info for No Bus:tty53
device: 'tty54': device_add
PM: Adding info for No Bus:tty54
device: 'tty55': device_add
PM: Adding info for No Bus:tty55
device: 'tty56': device_add
PM: Adding info for No Bus:tty56
device: 'tty57': device_add
PM: Adding info for No Bus:tty57
device: 'tty58': device_add
PM: Adding info for No Bus:tty58
device: 'tty59': device_add
PM: Adding info for No Bus:tty59
device: 'tty60': device_add
PM: Adding info for No Bus:tty60
device: 'tty61': device_add
PM: Adding info for No Bus:tty61
device: 'tty62': device_add
PM: Adding info for No Bus:tty62
device: 'tty63': device_add
PM: Adding info for No Bus:tty63
device class 'thermal': registering
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:14.4: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
pci 0000:00:12.2: EHCI: BIOS handoff
pci 0000:00:13.2: EHCI: BIOS handoff
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7280K (ffff88007f8e4000 - ffff880080000000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbf90000-0xcff90000] (64MB) mapped at [ffff8800cbf90000-ffff8800cff8ffff]
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x00000007)
device class 'msr': registering
device: 'msr0': device_add
PM: Adding info for No Bus:msr0
device: 'msr1': device_add
PM: Adding info for No Bus:msr1
device: 'msr2': device_add
PM: Adding info for No Bus:msr2
device: 'msr3': device_add
PM: Adding info for No Bus:msr3
device class 'cpuid': registering
device: 'cpu0': device_add
PM: Adding info for No Bus:cpu0
device: 'cpu1': device_add
PM: Adding info for No Bus:cpu1
device: 'cpu2': device_add
PM: Adding info for No Bus:cpu2
device: 'cpu3': device_add
PM: Adding info for No Bus:cpu3
Registering platform device 'microcode'. Parent at platform
device: 'microcode': device_add
bus: 'platform': add device microcode
PM: Adding info for platform:microcode
microcode: CPU0: patch_level=0x010000c9
microcode: CPU1: patch_level=0x010000c9
microcode: CPU2: patch_level=0x010000c9
microcode: CPU3: patch_level=0x010000c9
device: 'microcode': device_add
PM: Adding info for No Bus:microcode
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Registering platform device 'platform-framebuffer.0'. Parent at platform
device: 'platform-framebuffer.0': device_add
bus: 'platform': add device platform-framebuffer.0
PM: Adding info for platform:platform-framebuffer.0
bus: 'clocksource': registered
device: 'clocksource': device_add
PM: Adding info for No Bus:clocksource
device: 'clocksource0': device_add
bus: 'clocksource': add device clocksource0
PM: Adding info for clocksource:clocksource0
bus: 'platform': add driver alarmtimer
Registering platform device 'alarmtimer'. Parent at platform
device: 'alarmtimer': device_add
bus: 'platform': add device alarmtimer
PM: Adding info for platform:alarmtimer
bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer
bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer
alarmtimer alarmtimer: no default pinctrl state
driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer'
bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer
bus: 'clockevents': registered
device: 'clockevents': device_add
PM: Adding info for No Bus:clockevents
device: 'clockevent0': device_add
bus: 'clockevents': add device clockevent0
PM: Adding info for clockevents:clockevent0
device: 'clockevent1': device_add
bus: 'clockevents': add device clockevent1
PM: Adding info for clockevents:clockevent1
device: 'clockevent2': device_add
bus: 'clockevents': add device clockevent2
PM: Adding info for clockevents:clockevent2
device: 'clockevent3': device_add
bus: 'clockevents': add device clockevent3
PM: Adding info for clockevents:clockevent3
device: 'clockevent4': device_add
bus: 'clockevents': add device clockevent4
PM: Adding info for clockevents:clockevent4
device: 'clockevent5': device_add
bus: 'clockevents': add device clockevent5
PM: Adding info for clockevents:clockevent5
device: 'broadcast': device_add
bus: 'clockevents': add device broadcast
PM: Adding info for clockevents:broadcast
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1391627239.559:1): initialized
bus: 'event_source': registered
device: 'ibs_op': device_add
bus: 'event_source': add device ibs_op
PM: Adding info for event_source:ibs_op
device: 'ibs_fetch': device_add
bus: 'event_source': add device ibs_fetch
PM: Adding info for event_source:ibs_fetch
device: 'cpu': device_add
bus: 'event_source': add device cpu
PM: Adding info for event_source:cpu
device: 'breakpoint': device_add
bus: 'event_source': add device breakpoint
PM: Adding info for event_source:breakpoint
device: 'tracepoint': device_add
bus: 'event_source': add device tracepoint
PM: Adding info for event_source:tracepoint
device: 'software': device_add
bus: 'event_source': add device software
PM: Adding info for event_source:software
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
device: 'autofs': device_add
PM: Adding info for No Bus:autofs
fuse init (API version 7.22)
device: 'fuse': device_add
PM: Adding info for No Bus:fuse
device class 'cuse': registering
device: 'cuse': device_add
PM: Adding info for No Bus:cuse
msgmni has been set to 19992
async_tx: api initialized (async)
Key type asymmetric registered
device class 'bsg': registering
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 139333 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 70400 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
bus: 'pci': add driver intel_mid_gpio
bus: 'platform': add driver timb-gpio
bus: 'pci_express': registered
bus: 'pci': add driver pcieport
bus: 'pci': driver_probe_device: matched device 0000:00:02.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
pcieport 0000:00:02.0: no default pinctrl state
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
device: '0000:00:02.0:pcie08': device_add
bus: 'pci_express': add device 0000:00:02.0:pcie08
PM: Adding info for pci_express:0000:00:02.0:pcie08
driver: '0000:00:02.0': driver_bound: bound to device 'pcieport'
bus: 'pci': really_probe: bound device 0000:00:02.0 to driver pcieport
bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver pcieport
bus: 'pci': really_probe: probing driver pcieport with device 0000:00:06.0
pcieport 0000:00:06.0: no default pinctrl state
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
device: '0000:00:06.0:pcie08': device_add
bus: 'pci_express': add device 0000:00:06.0:pcie08
PM: Adding info for pci_express:0000:00:06.0:pcie08
driver: '0000:00:06.0': driver_bound: bound to device 'pcieport'
bus: 'pci': really_probe: bound device 0000:00:06.0 to driver pcieport
bus: 'pci_express': add driver aer
bus: 'pci_express': add driver pcie_pme
bus: 'pci': add driver pci-stub
bus: 'pci': add driver tsi721
device: 'fbcon': device_add
PM: Adding info for No Bus:fbcon
bus: 'platform': add driver ipmi
ipmi message handler version 39.2
bus: 'acpi': add driver hardware_error_device
GHES: HEST is not enabled!
device: 'ptmx': device_add
PM: Adding info for No Bus:ptmx
bus: 'spi': add driver max310x
device: 'ttyprintk': device_add
PM: Adding info for No Bus:ttyprintk
device class 'raw': registering
device: 'rawctl': device_add
PM: Adding info for No Bus:rawctl
device: 'hpet': device_add
PM: Adding info for No Bus:hpet
bus: 'acpi': add driver hpet
bus: 'acpi': driver_probe_device: matched device PNP0103:00 with driver hpet
bus: 'acpi': really_probe: probing driver hpet with device PNP0103:00
hpet PNP0103:00: no default pinctrl state
hpet: probe of PNP0103:00 rejects match -19
device: 'nvram': device_add
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
lkdtm: No crash points registered, enable through debugfs
device: 'tgt': device_add
PM: Adding info for No Bus:tgt
device class 'raid_devices': registering
device class 'spi_transport': registering
device class 'spi_host': registering
device class 'fc_host': registering
device class 'fc_vports': registering
device class 'fc_remote_ports': registering
device class 'fc_transport': registering
Loading iSCSI transport class v2.0-870.
device class 'iscsi_transport': registering
device class 'iscsi_endpoint': registering
device class 'iscsi_iface': registering
device class 'iscsi_host': registering
device class 'iscsi_connection': registering
device class 'iscsi_session': registering
bus: 'iscsi_flashnode': registered
device class 'sas_host': registering
device class 'sas_phy': registering
device class 'sas_port': registering
device class 'sas_device': registering
device class 'sas_end_device': registering
device class 'sas_expander': registering
device class 'srp_host': registering
device class 'srp_remote_ports': registering
device class 'scsi_disk': registering
bus: 'scsi': add driver sd
bus: 'pci': add driver ahci
bus: 'pci': driver_probe_device: matched device 0000:00:11.0 with driver ahci
bus: 'pci': really_probe: probing driver ahci with device 0000:00:11.0
ahci 0000:00:11.0: no default pinctrl state
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
device: 'ata1': device_add
PM: Adding info for No Bus:ata1
device: 'ata1': device_add
PM: Adding info for No Bus:ata1
device: 'link1': device_add
PM: Adding info for No Bus:link1
device: 'link1': device_add
PM: Adding info for No Bus:link1
device: 'dev1.0': device_add
PM: Adding info for No Bus:dev1.0
device: 'dev1.0': device_add
PM: Adding info for No Bus:dev1.0
device: 'ata2': device_add
PM: Adding info for No Bus:ata2
device: 'ata2': device_add
PM: Adding info for No Bus:ata2
device: 'link2': device_add
PM: Adding info for No Bus:link2
device: 'link2': device_add
PM: Adding info for No Bus:link2
device: 'dev2.0': device_add
PM: Adding info for No Bus:dev2.0
device: 'dev2.0': device_add
PM: Adding info for No Bus:dev2.0
device: 'ata3': device_add
PM: Adding info for No Bus:ata3
device: 'ata3': device_add
PM: Adding info for No Bus:ata3
device: 'link3': device_add
PM: Adding info for No Bus:link3
device: 'link3': device_add
PM: Adding info for No Bus:link3
device: 'dev3.0': device_add
PM: Adding info for No Bus:dev3.0
device: 'dev3.0': device_add
PM: Adding info for No Bus:dev3.0
device: 'ata4': device_add
PM: Adding info for No Bus:ata4
device: 'ata4': device_add
PM: Adding info for No Bus:ata4
device: 'link4': device_add
PM: Adding info for No Bus:link4
device: 'link4': device_add
PM: Adding info for No Bus:link4
device: 'dev4.0': device_add
PM: Adding info for No Bus:dev4.0
device: 'dev4.0': device_add
PM: Adding info for No Bus:dev4.0
device: 'ata5': device_add
PM: Adding info for No Bus:ata5
device: 'ata5': device_add
PM: Adding info for No Bus:ata5
device: 'link5': device_add
PM: Adding info for No Bus:link5
device: 'link5': device_add
PM: Adding info for No Bus:link5
device: 'dev5.0': device_add
PM: Adding info for No Bus:dev5.0
device: 'dev5.0': device_add
PM: Adding info for No Bus:dev5.0
device: 'ata6': device_add
PM: Adding info for No Bus:ata6
device: 'ata6': device_add
PM: Adding info for No Bus:ata6
device: 'link6': device_add
PM: Adding info for No Bus:link6
device: 'link6': device_add
PM: Adding info for No Bus:link6
device: 'dev6.0': device_add
PM: Adding info for No Bus:dev6.0
device: 'dev6.0': device_add
PM: Adding info for No Bus:dev6.0
scsi0 : ahci
device: 'host0': device_add
bus: 'scsi': add device host0
PM: Adding info for scsi:host0
device: 'host0': device_add
PM: Adding info for No Bus:host0
scsi1 : ahci
device: 'host1': device_add
bus: 'scsi': add device host1
PM: Adding info for scsi:host1
device: 'host1': device_add
PM: Adding info for No Bus:host1
scsi2 : ahci
device: 'host2': device_add
bus: 'scsi': add device host2
PM: Adding info for scsi:host2
device: 'host2': device_add
PM: Adding info for No Bus:host2
scsi3 : ahci
device: 'host3': device_add
bus: 'scsi': add device host3
PM: Adding info for scsi:host3
device: 'host3': device_add
PM: Adding info for No Bus:host3
scsi4 : ahci
device: 'host4': device_add
bus: 'scsi': add device host4
PM: Adding info for scsi:host4
device: 'host4': device_add
PM: Adding info for No Bus:host4
scsi5 : ahci
device: 'host5': device_add
bus: 'scsi': add device host5
PM: Adding info for scsi:host5
device: 'host5': device_add
PM: Adding info for No Bus:host5
ata1: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe500 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe580 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe600 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe680 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe700 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfbdfe400 port 0xfbdfe780 irq 22
driver: '0000:00:11.0': driver_bound: bound to device 'ahci'
bus: 'pci': really_probe: bound device 0000:00:11.0 to driver ahci
Rounding down aligned max_sectors from 4294967295 to 4294967288
Registering platform device 'Fixed MDIO bus.0'. Parent at platform
device: 'Fixed MDIO bus.0': device_add
bus: 'platform': add device Fixed MDIO bus.0
PM: Adding info for platform:Fixed MDIO bus.0
device: 'fixed-0': device_add
PM: Adding info for No Bus:fixed-0
libphy: Fixed MDIO Bus: probed
bus: 'platform': add driver macb
bus: 'platform': remove driver macb
driver: 'macb': driver_release
device class 'uio': registering
bus: 'pnp': add driver i8042 kbd
bus: 'pnp': driver_probe_device: matched device 00:07 with driver i8042 kbd
bus: 'pnp': really_probe: probing driver i8042 kbd with device 00:07
i8042 kbd 00:07: no default pinctrl state
driver: '00:07': driver_bound: bound to device 'i8042 kbd'
bus: 'pnp': really_probe: bound device 00:07 to driver i8042 kbd
bus: 'pnp': add driver i8042 aux
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Registering platform device 'i8042'. Parent at platform
device: 'i8042': device_add
bus: 'platform': add device i8042
PM: Adding info for platform:i8042
bus: 'platform': add driver i8042
bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
bus: 'platform': really_probe: probing driver i8042 with device i8042
i8042 i8042: no default pinctrl state
serio: i8042 KBD port at 0x60,0x64 irq 1
driver: 'i8042': driver_bound: bound to device 'i8042'
bus: 'platform': really_probe: bound device i8042 to driver i8042
bus: 'serio': add driver atkbd
Driver for 1-wire Dallas network protocol.
bus: 'w1': registered
bus: 'w1': add driver w1_master_driver
bus: 'w1': add driver w1_slave_driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
device: 'raid5wq': device_add
bus: 'workqueue': add device raid5wq
device: 'serio0': device_add
PM: Adding info for workqueue:raid5wq
bus: 'serio': add device serio0
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
PM: Adding info for serio:serio0
bus: 'serio': driver_probe_device: matched device serio0 with driver atkbd
bus: 'serio': really_probe: probing driver atkbd with device serio0
atkbd serio0: no default pinctrl state
device-mapper: uevent: version 1.0.3
device: 'device-mapper': device_add
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
device-mapper: raid: Loading target version 1.5.2
ledtrig-cpu: registered to indicate activity on CPUs
bus: 'hid': registered
device class 'hidraw': registering
hidraw: raw HID events driver (C) Jiri Kosina
device: 'uhid': device_add
PM: Adding info for No Bus:uhid
bus: 'hid': add driver hid-generic
bus: 'acpi': add driver quickstart
bus: 'acpi': remove driver quickstart
driver: 'quickstart': driver_release
device class 'extcon': registering
device class 'powercap': registering
NET: Registered protocol family 10
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
bus: 'machinecheck': registered
device: 'machinecheck': device_add
PM: Adding info for No Bus:machinecheck
device: 'machinecheck0': device_add
bus: 'machinecheck': add device machinecheck0
PM: Adding info for machinecheck:machinecheck0
device: 'machinecheck1': device_add
bus: 'machinecheck': add device machinecheck1
PM: Adding info for machinecheck:machinecheck1
device: 'machinecheck2': device_add
bus: 'machinecheck': add device machinecheck2
PM: Adding info for machinecheck:machinecheck2
device: 'machinecheck3': device_add
bus: 'machinecheck': add device machinecheck3
PM: Adding info for machinecheck:machinecheck3
device: 'mcelog': device_add
PM: Adding info for No Bus:mcelog
device: 'cpu_dma_latency': device_add
PM: Adding info for No Bus:cpu_dma_latency
device: 'network_latency': device_add
PM: Adding info for No Bus:network_latency
device: 'network_throughput': device_add
PM: Adding info for No Bus:network_throughput
Loading compiled-in X.509 certificates
registered taskstats version 1
RIO: rio_register_scan for mport_id=-1
console [netcon0] enabled
netconsole: network logging started
drivers/rtc/hctosys.c: unable to open rtc device ()
bus: 'platform': add driver charger-manager
device: 'input0': device_add
PM: Adding info for No Bus:input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
device: 'event0': device_add
PM: Adding info for No Bus:event0
driver: 'serio0': driver_bound: bound to device 'atkbd'
bus: 'serio': really_probe: bound device serio0 to driver atkbd
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying PMP SRST workaround and retrying
tsc: Refined TSC clocksource calibration: 2809.473 MHz
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: HPA detected: current 488395055, native 488397168
ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: HPA detected: current 312579695, native 312581808
ata3.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
ata3.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
device: 'target0:0:0': device_add
bus: 'scsi': add device target0:0:0
PM: Adding info for scsi:target0:0:0
device: '0:0:0:0': device_add
bus: 'scsi': add device 0:0:0:0
PM: Adding info for scsi:0:0:0:0
bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
sd 0:0:0:0: no default pinctrl state
device: '0:0:0:0': device_add
PM: Adding info for No Bus:0:0:0:0
driver: '0:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
device: '0:0:0:0': device_add
PM: Adding info for No Bus:0:0:0:0
device: '0:0:0:0': device_add
PM: Adding info for No Bus:0:0:0:0
sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: '8:0': device_add
PM: Adding info for No Bus:8:0
device: 'sda': device_add
PM: Adding info for No Bus:sda
ata3.00: configured for UDMA/133
sda: sda1 sda2 sda3 sda4
device: 'sda1': device_add
PM: Adding info for No Bus:sda1
device: 'sda2': device_add
PM: Adding info for No Bus:sda2
device: 'sda3': device_add
PM: Adding info for No Bus:sda3
device: 'sda4': device_add
PM: Adding info for No Bus:sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-7: WDC WD1600BEVS-07RST0, 04.01G04, max UDMA/133
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
device: 'target1:0:0': device_add
bus: 'scsi': add device target1:0:0
PM: Adding info for scsi:target1:0:0
device: '1:0:0:0': device_add
bus: 'scsi': add device 1:0:0:0
PM: Adding info for scsi:1:0:0:0
bus: 'scsi': driver_probe_device: matched device 1:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
sd 1:0:0:0: no default pinctrl state
device: '1:0:0:0': device_add
PM: Adding info for No Bus:1:0:0:0
driver: '1:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
device: '1:0:0:0': device_add
PM: Adding info for No Bus:1:0:0:0
device: '1:0:0:0': device_add
sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
PM: Adding info for No Bus:1:0:0:0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5
device: 'target2:0:0': device_add
bus: 'scsi': add device target2:0:0
PM: Adding info for scsi:target2:0:0
device: '2:0:0:0': device_add
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
bus: 'scsi': add device 2:0:0:0
PM: Adding info for scsi:2:0:0:0
device: '8:16': device_add
bus: 'scsi': driver_probe_device: matched device 2:0:0:0 with driver sd
bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
sd 2:0:0:0: no default pinctrl state
PM: Adding info for No Bus:8:16
device: '2:0:0:0': device_add
device: 'sdb': device_add
PM: Adding info for No Bus:2:0:0:0
driver: '2:0:0:0': driver_bound: bound to device 'sd'
bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
device: '2:0:0:0': device_add
PM: Adding info for No Bus:2:0:0:0
device: '2:0:0:0': device_add
PM: Adding info for No Bus:sdb
sd 2:0:0:0: [sdc] 312579695 512-byte logical blocks: (160 GB/149 GiB)
PM: Adding info for No Bus:2:0:0:0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
device: '8:32': device_add
PM: Adding info for No Bus:8:32
device: 'sdc': device_add
PM: Adding info for No Bus:sdc
sdb: sdb1
device: 'sdb1': device_add
PM: Adding info for No Bus:sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
device: 'sdc1': device_add
PM: Adding info for No Bus:sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 1636K (ffffffff81d5e000 - ffffffff81ef7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1648K (ffff880001664000 - ffff880001800000)
Freeing unused kernel memory: 924K (ffff880001b19000 - ffff880001c00000)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
random: nonblocking pool is initialized
NET: Registered protocol family 1
systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Set hostname to .
systemd[1]: Cannot add dependency job for unit catalyst-hook.service, ignoring: Unit catalyst-hook.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[124]: Vacuuming done, freed 0 bytes
systemd-udevd[157]: starting version 208
EXT4-fs (sda4): re-mounted. Opts: data=ordered
bus: 'cpu': add driver processor
bus: 'cpu': driver_probe_device: matched device cpu0 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu0
processor cpu0: no default pinctrl state
ACPI: processor limited to max C-state 1
device: 'cooling_device0': device_add
PM: Adding info for No Bus:cooling_device0
driver: 'cpu0': driver_bound: bound to device 'processor'
bus: 'cpu': really_probe: bound device cpu0 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu1 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu1
processor cpu1: no default pinctrl state
device: 'cooling_device1': device_add
PM: Adding info for No Bus:cooling_device1
driver: 'cpu1': driver_bound: bound to device 'processor'
bus: 'cpu': really_probe: bound device cpu1 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu2 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu2
processor cpu2: no default pinctrl state
device: 'cooling_device2': device_add
PM: Adding info for No Bus:cooling_device2
driver: 'cpu2': driver_bound: bound to device 'processor'
bus: 'cpu': really_probe: bound device cpu2 to driver processor
bus: 'cpu': driver_probe_device: matched device cpu3 with driver processor
bus: 'cpu': really_probe: probing driver processor with device cpu3
processor cpu3: no default pinctrl state
device: 'cooling_device3': device_add
PM: Adding info for No Bus:cooling_device3
driver: 'cpu3': driver_bound: bound to device 'processor'
bus: 'cpu': really_probe: bound device cpu3 to driver processor
acpi-cpufreq: overriding BIOS provided _PSD data
bus: 'acpi': add driver button
bus: 'acpi': driver_probe_device: matched device PNP0C0C:00 with driver button
bus: 'acpi': really_probe: probing driver button with device PNP0C0C:00
button PNP0C0C:00: no default pinctrl state
device: 'input1': device_add
PM: Adding info for No Bus:input1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
device: 'event1': device_add
PM: Adding info for No Bus:event1
ACPI: Power Button [PWRB]
driver: 'PNP0C0C:00': driver_bound: bound to device 'button'
bus: 'acpi': really_probe: bound device PNP0C0C:00 to driver button
bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button
bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
button LNXPWRBN:00: no default pinctrl state
device: 'input2': device_add
PM: Adding info for No Bus:input2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
device: 'event2': device_add
PM: Adding info for No Bus:event2
ACPI: Power Button [PWRF]
driver: 'LNXPWRBN:00': driver_bound: bound to device 'button'
bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button
bus: 'pnp': add driver rtc_cmos
bus: 'pnp': driver_probe_device: matched device 00:01 with driver rtc_cmos
bus: 'pnp': really_probe: probing driver rtc_cmos with device 00:01
rtc_cmos 00:01: no default pinctrl state
rtc_cmos 00:01: RTC can wake from S4
device: 'rtc0': device_add
PM: Adding info for No Bus:rtc0
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
driver: '00:01': driver_bound: bound to device 'rtc_cmos'
bus: 'pnp': really_probe: bound device 00:01 to driver rtc_cmos
bus: 'i2c': registered
bus: 'i2c': add driver dummy
ACPI: bus type USB registered
bus: 'usb': registered
bus: 'usb': add driver usbfs
usbcore: registered new interface driver usbfs
bus: 'usb': add driver hub
usbcore: registered new interface driver hub
bus: 'usb': add driver usb
usbcore: registered new device driver usb
bus: 'pci': add driver k10temp
bus: 'pci': driver_probe_device: matched device 0000:00:18.3 with driver k10temp
bus: 'pci': really_probe: probing driver k10temp with device 0000:00:18.3
k10temp 0000:00:18.3: no default pinctrl state
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
k10temp: probe of 0000:00:18.3 rejects match -19
bus: 'acpi': add driver ATK0110
bus: 'acpi': driver_probe_device: matched device ATK0110:00 with driver ATK0110
bus: 'acpi': really_probe: probing driver ATK0110 with device ATK0110:00
ATK0110 ATK0110:00: no default pinctrl state
device: 'hwmon0': device_add
PM: Adding info for No Bus:hwmon0
driver: 'ATK0110:00': driver_bound: bound to device 'ATK0110'
bus: 'acpi': really_probe: bound device ATK0110:00 to driver ATK0110
bus: 'serio': add driver serio_raw
Linux agpgart interface v0.103
device class 'drm': registering
[drm] Initialized drm 1.1.0 20060810
bus: 'pci': add driver r8169
bus: 'pci': driver_probe_device: matched device 0000:02:00.0 with driver r8169
bus: 'pci': really_probe: probing driver r8169 with device 0000:02:00.0
r8169 0000:02:00.0: no default pinctrl state
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
device: 'eth0': device_add
PM: Adding info for No Bus:eth0
r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90001818000, 00:24:8c:0d:93:47, XID 18000000 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
driver: '0000:02:00.0': driver_bound: bound to device 'r8169'
bus: 'pci': really_probe: bound device 0000:02:00.0 to driver r8169
device class 'sound': registering
device: 'timer': device_add
PM: Adding info for No Bus:timer
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 136 qtd 96 itd 192 sitd 96
ehci-pci: EHCI PCI platform driver
bus: 'pci': add driver ehci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:12.2 with driver ehci-pci
bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:12.2
ehci-pci 0000:00:12.2: no default pinctrl state
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci-pci 0000:00:12.2: MWI active
ehci-pci 0000:00:12.2: supports USB remote wakeup
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbdfe800
ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
device: 'usb1': device_add
bus: 'usb': add device usb1
PM: Adding info for usb:usb1
bus: 'usb': driver_probe_device: matched device usb1 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb1
usb usb1: no default pinctrl state
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
device: '1-0:1.0': device_add
bus: 'usb': add device 1-0:1.0
PM: Adding info for usb:1-0:1.0
bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
hub 1-0:1.0: no default pinctrl state
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
device: 'port4': device_add
PM: Adding info for No Bus:port4
device: 'port5': device_add
PM: Adding info for No Bus:port5
device: 'port6': device_add
PM: Adding info for No Bus:port6
hub 1-0:1.0: trying to enable port power on non-switchable hub
driver: '1-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb1': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb1 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: '0000:00:12.2': driver_bound: bound to device 'ehci-pci'
bus: 'pci': really_probe: bound device 0000:00:12.2 to driver ehci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:13.2 with driver ehci-pci
bus: 'pci': really_probe: probing driver ehci-pci with device 0000:00:13.2
ehci-pci 0000:00:13.2: no default pinctrl state
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci-pci 0000:00:13.2: MWI active
ehci-pci 0000:00:13.2: supports USB remote wakeup
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbdfec00
ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
device: 'usb2': device_add
bus: 'usb': add device usb2
PM: Adding info for usb:usb2
bus: 'usb': driver_probe_device: matched device usb2 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb2
usb usb2: no default pinctrl state
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
device: '2-0:1.0': device_add
bus: 'usb': add device 2-0:1.0
PM: Adding info for usb:2-0:1.0
bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
hub 2-0:1.0: no default pinctrl state
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
device: 'port4': device_add
PM: Adding info for No Bus:port4
device: 'port5': device_add
PM: Adding info for No Bus:port5
device: 'port6': device_add
PM: Adding info for No Bus:port6
hub 2-0:1.0: trying to enable port power on non-switchable hub
driver: '2-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb2': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: '0000:00:13.2': driver_bound: bound to device 'ehci-pci'
bus: 'pci': really_probe: bound device 0000:00:13.2 to driver ehci-pci
device: 'ttm': device_add
PM: Adding info for No Bus:ttm
bus: 'pci': add driver piix4_smbus
bus: 'pci': driver_probe_device: matched device 0000:00:14.0 with driver piix4_smbus
bus: 'pci': really_probe: probing driver piix4_smbus with device 0000:00:14.0
piix4_smbus 0000:00:14.0: no default pinctrl state
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
piix4_smbus: probe of 0000:00:14.0 rejects match -19
ehci-pci 0000:00:12.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
ehci-pci 0000:00:12.2: GetStatus port:5 status 001403 0 ACK POWER sig=k CSC CONNECT
hub 1-0:1.0: port 5: status 0501 change 0001
ehci-pci 0000:00:13.2: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 2-0:1.0: port 2: status 0501 change 0001
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
bus: 'platform': add driver SP5100 TCO timer
Registering platform device 'SP5100 TCO timer'. Parent at platform
device: 'SP5100 TCO timer': device_add
bus: 'platform': add device SP5100 TCO timer
PM: Adding info for platform:SP5100 TCO timer
bus: 'platform': driver_probe_device: matched device SP5100 TCO timer with driver SP5100 TCO timer
bus: 'platform': really_probe: probing driver SP5100 TCO timer with device SP5100 TCO timer
SP5100 TCO timer SP5100 TCO timer: no default pinctrl state
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
SP5100 TCO timer: probe of SP5100 TCO timer rejects match -19
net eth0: renaming to enp2s0
bus: 'pci': add driver snd_hda_intel
bus: 'pci': driver_probe_device: matched device 0000:03:00.1 with driver snd_hda_intel
bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:03:00.1
snd_hda_intel 0000:03:00.1: no default pinctrl state
ALSA sound/pci/hda/hda_intel.c:3173 0000:03:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:03:00.1: irq 43 for MSI/MSI-X
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
systemd-udevd[165]: renamed network interface eth0 to enp2s0
hub 1-0:1.0: state 7 ports 6 chg 0024 evt 0000
hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
device: 'card0': device_add
PM: Adding info for No Bus:card0
device: 'input3': device_add
PM: Adding info for No Bus:input3
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input3
device: 'event3': device_add
PM: Adding info for No Bus:event3
device: 'pcmC0D3p': device_add
PM: Adding info for No Bus:pcmC0D3p
device: 'hwC0D0': device_add
PM: Adding info for No Bus:hwC0D0
device: 'controlC0': device_add
PM: Adding info for No Bus:controlC0
driver: '0000:03:00.1': driver_bound: bound to device 'snd_hda_intel'
bus: 'pci': really_probe: bound device 0000:03:00.1 to driver snd_hda_intel
ehci-pci 0000:00:12.2: port 2 reset complete, port enabled
ehci-pci 0000:00:12.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-2: new high-speed USB device number 2 using ehci-pci
ohci-pci: OHCI PCI platform driver
bus: 'pci': add driver ohci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:12.0 with driver ohci-pci
bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:12.0
ohci-pci 0000:00:12.0: no default pinctrl state
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: created debug files
ohci-pci 0000:00:12.0: supports USB remote wakeup
ohci-pci 0000:00:12.0: irq 16, io mem 0xfbdfa000
ehci-pci 0000:00:12.2: port 2 reset complete, port enabled
ehci-pci 0000:00:12.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
ohci-pci 0000:00:12.0: OHCI controller state
ohci-pci 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
ohci-pci 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
ohci-pci 0000:00:12.0: cmdstatus 0x00000 SOC=0
ohci-pci 0000:00:12.0: intrstatus 0x00000004 SF
ohci-pci 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci-pci 0000:00:12.0: hcca frame #0005
ohci-pci 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
ohci-pci 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci-pci 0000:00:12.0: roothub.status 00008000 DRWE
ohci-pci 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
ohci-pci 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
ohci-pci 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.1 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
device: 'usb3': device_add
bus: 'usb': add device usb3
PM: Adding info for usb:usb3
bus: 'usb': driver_probe_device: matched device usb3 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb3
usb usb3: no default pinctrl state
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
device: '3-0:1.0': device_add
bus: 'usb': add device 3-0:1.0
PM: Adding info for usb:3-0:1.0
bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
hub 3-0:1.0: no default pinctrl state
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: no over-current protection
hub 3-0:1.0: power on to power good time: 4ms
hub 3-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
hub 3-0:1.0: trying to enable port power on non-switchable hub
driver: '3-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb3': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb3 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
ohci-pci 0000:00:12.0: FS/LS companion for 0000:00:12.2
driver: '0000:00:12.0': driver_bound: bound to device 'ohci-pci'
bus: 'pci': really_probe: bound device 0000:00:12.0 to driver ohci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:12.1 with driver ohci-pci
bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:12.1
ohci-pci 0000:00:12.1: no default pinctrl state
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: created debug files
ohci-pci 0000:00:12.1: supports USB remote wakeup
ohci-pci 0000:00:12.1: irq 16, io mem 0xfbdfb000
usb 1-2: default language 0x0409
usb 1-2: udev 2, busnum 1, minor = 1
usb 1-2: New USB device found, idVendor=2040, idProduct=c000
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: WinTV MiniStick
usb 1-2: Manufacturer: Hauppauge Computer Works
usb 1-2: SerialNumber: 4034713509
device: '1-2': device_add
bus: 'usb': add device 1-2
PM: Adding info for usb:1-2
bus: 'usb': driver_probe_device: matched device 1-2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 1-2
usb 1-2: no default pinctrl state
usb 1-2: usb_probe_device
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
device: '1-2:1.0': device_add
bus: 'usb': add device 1-2:1.0
PM: Adding info for usb:1-2:1.0
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
device: 'ep_02': device_add
PM: Adding info for No Bus:ep_02
driver: '1-2': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device 1-2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
ehci-pci 0000:00:12.2: port 5 low speed --> companion
ohci-pci 0000:00:12.1: OHCI controller state
ohci-pci 0000:00:12.1: OHCI 1.0, NO legacy support registers, rh state running
ohci-pci 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3
ohci-pci 0000:00:12.1: cmdstatus 0x00000 SOC=0
ohci-pci 0000:00:12.1: intrstatus 0x00000004 SF
ohci-pci 0000:00:12.1: intrenable 0x8000001a MIE UE RD WDH
ohci-pci 0000:00:12.1: hcca frame #0005
ohci-pci 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
ohci-pci 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci-pci 0000:00:12.1: roothub.status 00008000 DRWE
ohci-pci 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
ohci-pci 0000:00:12.1: roothub.portstatus [1] 0x00010301 CSC LSDA PPS CCS
ohci-pci 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.1 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
device: 'usb4': device_add
bus: 'usb': add device usb4
PM: Adding info for usb:usb4
bus: 'usb': driver_probe_device: matched device usb4 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb4
usb usb4: no default pinctrl state
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
device: '4-0:1.0': device_add
bus: 'usb': add device 4-0:1.0
PM: Adding info for usb:4-0:1.0
bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 4-0:1.0
hub 4-0:1.0: no default pinctrl state
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: no over-current protection
hub 4-0:1.0: power on to power good time: 4ms
hub 4-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
hub 4-0:1.0: trying to enable port power on non-switchable hub
driver: '4-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb4': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb4 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
ohci-pci 0000:00:12.1: FS/LS companion for 0000:00:12.2
driver: '0000:00:12.1': driver_bound: bound to device 'ohci-pci'
bus: 'pci': really_probe: bound device 0000:00:12.1 to driver ohci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:13.0 with driver ohci-pci
bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:13.0
ohci-pci 0000:00:13.0: no default pinctrl state
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: created debug files
ohci-pci 0000:00:13.0: supports USB remote wakeup
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbdfc000
ehci-pci 0000:00:12.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 6 chg 0004 evt 0000
hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ohci-pci 0000:00:13.0: OHCI controller state
ohci-pci 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
ohci-pci 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
ohci-pci 0000:00:13.0: cmdstatus 0x00000 SOC=0
ohci-pci 0000:00:13.0: intrstatus 0x00000004 SF
ohci-pci 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci-pci 0000:00:13.0: hcca frame #0005
ohci-pci 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
ohci-pci 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci-pci 0000:00:13.0: roothub.status 00008000 DRWE
ohci-pci 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
ohci-pci 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
ohci-pci 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
usb usb5: default language 0x0409
usb usb5: udev 1, busnum 5, minor = 512
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.1 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
device: 'usb5': device_add
bus: 'usb': add device usb5
PM: Adding info for usb:usb5
bus: 'usb': driver_probe_device: matched device usb5 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb5
usb usb5: no default pinctrl state
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
device: '5-0:1.0': device_add
bus: 'usb': add device 5-0:1.0
PM: Adding info for usb:5-0:1.0
bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 5-0:1.0
hub 5-0:1.0: no default pinctrl state
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: no over-current protection
hub 5-0:1.0: power on to power good time: 4ms
hub 5-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
hub 5-0:1.0: trying to enable port power on non-switchable hub
driver: '5-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb5': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb5 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
ohci-pci 0000:00:13.0: FS/LS companion for 0000:00:13.2
driver: '0000:00:13.0': driver_bound: bound to device 'ohci-pci'
bus: 'pci': really_probe: bound device 0000:00:13.0 to driver ohci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:13.1 with driver ohci-pci
bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:13.1
ohci-pci 0000:00:13.1: no default pinctrl state
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: created debug files
ohci-pci 0000:00:13.1: supports USB remote wakeup
ohci-pci 0000:00:13.1: irq 18, io mem 0xfbdfd000
ehci-pci 0000:00:13.2: port 2 reset complete, port enabled
ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
hub 4-0:1.0: port 2: status 0301 change 0001
ohci-pci 0000:00:13.1: OHCI controller state
ohci-pci 0000:00:13.1: OHCI 1.0, NO legacy support registers, rh state running
ohci-pci 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
ohci-pci 0000:00:13.1: cmdstatus 0x00000 SOC=0
ohci-pci 0000:00:13.1: intrstatus 0x00000004 SF
ohci-pci 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci-pci 0000:00:13.1: hcca frame #0005
ohci-pci 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
ohci-pci 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
ohci-pci 0000:00:13.1: roothub.status 00008000 DRWE
ohci-pci 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
ohci-pci 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
ohci-pci 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
usb usb6: default language 0x0409
usb usb6: udev 1, busnum 6, minor = 640
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.1 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
device: 'usb6': device_add
bus: 'usb': add device usb6
PM: Adding info for usb:usb6
bus: 'usb': driver_probe_device: matched device usb6 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb6
usb usb6: no default pinctrl state
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
device: '6-0:1.0': device_add
bus: 'usb': add device 6-0:1.0
PM: Adding info for usb:6-0:1.0
bus: 'usb': driver_probe_device: matched device 6-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 6-0:1.0
hub 6-0:1.0: no default pinctrl state
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: no over-current protection
hub 6-0:1.0: power on to power good time: 4ms
hub 6-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
device: 'port3': device_add
PM: Adding info for No Bus:port3
hub 6-0:1.0: trying to enable port power on non-switchable hub
driver: '6-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 6-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb6': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb6 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
ohci-pci 0000:00:13.1: FS/LS companion for 0000:00:13.2
driver: '0000:00:13.1': driver_bound: bound to device 'ohci-pci'
bus: 'pci': really_probe: bound device 0000:00:13.1 to driver ohci-pci
bus: 'pci': driver_probe_device: matched device 0000:00:14.5 with driver ohci-pci
bus: 'pci': really_probe: probing driver ohci-pci with device 0000:00:14.5
ohci-pci 0000:00:14.5: no default pinctrl state
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: created debug files
ohci-pci 0000:00:14.5: supports USB remote wakeup
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbdff000
[drm] radeon kernel modesetting enabled.
bus: 'pci': add driver radeon
bus: 'pci': driver_probe_device: matched device 0000:03:00.0 with driver radeon
bus: 'pci': really_probe: probing driver radeon with device 0000:03:00.0
radeon 0000:03:00.0: no default pinctrl state
device: 'controlD64': device_add
PM: Adding info for No Bus:controlD64
device: 'card0': device_add
PM: Adding info for No Bus:card0
[drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x174B:0x174B).
[drm] register mmio base: 0xFBFC0000
[drm] register mmio size: 131072
ATOM BIOS: BARTS
radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:03:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 5120108 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
__allocate_fw_buf: fw-radeon/SUMO_uvd.bin buf=ffff88029f6dd180
usb 2-2: new high-speed USB device number 2 using ehci-pci
ohci-pci 0000:00:14.5: OHCI controller state
ohci-pci 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running
ohci-pci 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
ohci-pci 0000:00:14.5: cmdstatus 0x00000 SOC=0
ohci-pci 0000:00:14.5: intrstatus 0x00000004 SF
ohci-pci 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci-pci 0000:00:14.5: hcca frame #0005
ohci-pci 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
ohci-pci 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
ohci-pci 0000:00:14.5: roothub.status 00008000 DRWE
ohci-pci 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
ohci-pci 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
usb usb7: default language 0x0409
usb usb7: udev 1, busnum 7, minor = 768
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.1 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
device: 'usb7': device_add
bus: 'usb': add device usb7
PM: Adding info for usb:usb7
bus: 'usb': driver_probe_device: matched device usb7 with driver usb
bus: 'usb': really_probe: probing driver usb with device usb7
usb usb7: no default pinctrl state
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
device: '7-0:1.0': device_add
bus: 'usb': add device 7-0:1.0
PM: Adding info for usb:7-0:1.0
bus: 'usb': driver_probe_device: matched device 7-0:1.0 with driver hub
bus: 'usb': really_probe: probing driver hub with device 7-0:1.0
hub 7-0:1.0: no default pinctrl state
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: no over-current protection
hub 7-0:1.0: power on to power good time: 4ms
hub 7-0:1.0: local power source is good
device: 'port1': device_add
PM: Adding info for No Bus:port1
device: 'port2': device_add
PM: Adding info for No Bus:port2
hub 7-0:1.0: trying to enable port power on non-switchable hub
driver: '7-0:1.0': driver_bound: bound to device 'hub'
bus: 'usb': really_probe: bound device 7-0:1.0 to driver hub
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: 'usb7': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device usb7 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
driver: '0000:00:14.5': driver_bound: bound to device 'ohci-pci'
bus: 'pci': really_probe: bound device 0000:00:14.5 to driver ohci-pci
ehci-pci 0000:00:13.2: port 2 reset complete, port enabled
ehci-pci 0000:00:13.2: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
fw_set_page_data: fw-radeon/SUMO_uvd.bin buf=ffff88029f6dd180 data=ffffc90002c4b000 size=205080
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading BARTS Microcode
__allocate_fw_buf: fw-radeon/BARTS_pfp.bin buf=ffff88029f6dd200
usb 2-2: default language 0x0409
usb 2-2: udev 2, busnum 2, minor = 129
usb 2-2: New USB device found, idVendor=14f7, idProduct=0001
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: UDST70XX
usb 2-2: Manufacturer: DTV-DVB
device: '2-2': device_add
bus: 'usb': add device 2-2
PM: Adding info for usb:2-2
bus: 'usb': driver_probe_device: matched device 2-2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 2-2
usb 2-2: no default pinctrl state
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
device: '2-2:1.0': device_add
bus: 'usb': add device 2-2:1.0
PM: Adding info for usb:2-2:1.0
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
device: 'ep_82': device_add
PM: Adding info for No Bus:ep_82
driver: '2-2': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device 2-2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
ehci-pci 0000:00:12.2: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC
hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/BARTS_pfp.bin
fw_set_page_data: fw-radeon/BARTS_pfp.bin buf=ffff88029f6dd200 data=ffffc90002ca4000 size=4480
__allocate_fw_buf: fw-radeon/BARTS_me.bin buf=ffff88029f6dd780
hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 4-0:1.0: state 7 ports 3 chg 0004 evt 0000
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend, wakeup 1
ohci-pci 0000:00:12.0: suspend root hub
hub 4-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend, wakeup 1
ohci-pci 0000:00:13.0: suspend root hub
ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000311
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/BARTS_me.bin
fw_set_page_data: fw-radeon/BARTS_me.bin buf=ffff88029f6dd780 data=ffffc90002ca7000 size=5504
__allocate_fw_buf: fw-radeon/BTC_rlc.bin buf=ffff88029f6dd880
ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin
fw_set_page_data: fw-radeon/BTC_rlc.bin buf=ffff88029f6dd880 data=ffffc90002caa000 size=3072
__allocate_fw_buf: fw-radeon/BARTS_mc.bin buf=ffff88029f6dda00
usb 4-2: new low-speed USB device number 2 using ohci-pci
ohci-pci 0000:00:12.1: port[1] reset timeout, stat 00000313
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/BARTS_mc.bin
fw_set_page_data: fw-radeon/BARTS_mc.bin buf=ffff88029f6dda00 data=ffffc90002cba000 size=24096
__allocate_fw_buf: fw-radeon/BARTS_smc.bin buf=ffff8802a001e600
device class 'rc': registering
radeon 0000:03:00.0: firmware: direct-loading firmware radeon/BARTS_smc.bin
fw_set_page_data: fw-radeon/BARTS_smc.bin buf=ffff8802a001e600 data=ffffc90002cc1000 size=24840
ohci-pci 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88029f403c00
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88029f403c0c
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002db2118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: irq 44 for MSI/MSI-X
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 1 usecs
usb 4-2: skipped 1 descriptor after interface
usb 4-2: default language 0x0409
usb 4-2: udev 2, busnum 4, minor = 385
usb 4-2: New USB device found, idVendor=15d9, idProduct=0a4f
usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-2: Product: USB OPTICAL MOUSE
device: '4-2': device_add
bus: 'usb': add device 4-2
PM: Adding info for usb:4-2
bus: 'usb': driver_probe_device: matched device 4-2 with driver usb
bus: 'usb': really_probe: probing driver usb with device 4-2
usb 4-2: no default pinctrl state
usb 4-2: usb_probe_device
usb 4-2: configuration #1 chosen from 1 choice
usb 4-2: adding 4-2:1.0 (config #1, interface 0)
device: '4-2:1.0': device_add
bus: 'usb': add device 4-2:1.0
PM: Adding info for usb:4-2:1.0
device: 'ep_81': device_add
PM: Adding info for No Bus:ep_81
driver: '4-2': driver_bound: bound to device 'usb'
bus: 'usb': really_probe: bound device 4-2 to driver usb
device: 'ep_00': device_add
PM: Adding info for No Bus:ep_00
hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 6-0:1.0: hub_suspend
usb usb6: bus auto-suspend, wakeup 1
ohci-pci 0000:00:13.1: suspend root hub
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: hub_suspend
usb usb7: bus auto-suspend, wakeup 1
ohci-pci 0000:00:14.5: suspend root hub
hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0004
device class 'dvb': registering
bus: 'usb': add driver usbhid
bus: 'usb': driver_probe_device: matched device 4-2:1.0 with driver usbhid
bus: 'usb': really_probe: probing driver usbhid with device 4-2:1.0
usbhid 4-2:1.0: no default pinctrl state
usbhid 4-2:1.0: usb_probe_interface
usbhid 4-2:1.0: usb_probe_interface - got id
device: '0003:15D9:0A4F.0001': device_add
bus: 'hid': add device 0003:15D9:0A4F.0001
PM: Adding info for hid:0003:15D9:0A4F.0001
bus: 'hid': driver_probe_device: matched device 0003:15D9:0A4F.0001 with driver hid-generic
bus: 'hid': really_probe: probing driver hid-generic with device 0003:15D9:0A4F.0001
hid-generic 0003:15D9:0A4F.0001: no default pinctrl state
device: 'input4': device_add
PM: Adding info for No Bus:input4
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4
device: 'event4': device_add
PM: Adding info for No Bus:event4
device: 'hidraw0': device_add
PM: Adding info for No Bus:hidraw0
hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.1-2/input0
driver: '0003:15D9:0A4F.0001': driver_bound: bound to device 'hid-generic'
bus: 'hid': really_probe: bound device 0003:15D9:0A4F.0001 to driver hid-generic
driver: '4-2:1.0': driver_bound: bound to device 'usbhid'
bus: 'usb': really_probe: bound device 4-2:1.0 to driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
bus: 'usb': add driver smsusb
bus: 'usb': driver_probe_device: matched device 1-2:1.0 with driver smsusb
bus: 'usb': really_probe: probing driver smsusb with device 1-2:1.0
smsusb 1-2:1.0: no default pinctrl state
smsusb 1-2:1.0: usb_probe_interface
smsusb 1-2:1.0: usb_probe_interface - got id
sms_ir_init: Allocating rc device
sms_ir_init: IR port 0, timeout 100 ms
sms_ir_init: Input device (IR) SMS IR (Hauppauge WinTV MiniStick) is set for key events
[drm] ib test on ring 5 succeeded
device: 'i2c-0': device_add
bus: 'i2c': add device i2c-0
PM: Adding info for i2c:i2c-0
device: 'i2c-1': device_add
bus: 'i2c': add device i2c-1
PM: Adding info for i2c:i2c-1
device: 'i2c-2': device_add
bus: 'i2c': add device i2c-2
PM: Adding info for i2c:i2c-2
device: 'i2c-3': device_add
bus: 'i2c': add device i2c-3
PM: Adding info for i2c:i2c-3
device: 'i2c-4': device_add
bus: 'i2c': add device i2c-4
PM: Adding info for i2c:i2c-4
device: 'i2c-5': device_add
bus: 'i2c': add device i2c-5
PM: Adding info for i2c:i2c-5
device: 'i2c-6': device_add
bus: 'i2c': add device i2c-6
PM: Adding info for i2c:i2c-6
device: 'i2c-7': device_add
bus: 'i2c': add device i2c-7
PM: Adding info for i2c:i2c-7
device: 'i2c-8': device_add
bus: 'i2c': add device i2c-8
PM: Adding info for i2c:i2c-8
device: 'card0-DP-1': device_add
PM: Adding info for No Bus:card0-DP-1
device: 'card0-HDMI-A-1': device_add
PM: Adding info for No Bus:card0-HDMI-A-1
device: 'card0-DVI-I-1': device_add
PM: Adding info for No Bus:card0-DVI-I-1
device: 'card0-DVI-D-1': device_add
PM: Adding info for No Bus:card0-DVI-D-1
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Internal thermal controller with fan control
device: 'hwmon1': device_add
PM: Adding info for No Bus:hwmon1
[drm] radeon: dpm initialized
Registered IR keymap rc-hauppauge
device: 'rc0': device_add
PM: Adding info for No Bus:rc0
device: 'input5': device_add
PM: Adding info for No Bus:input5
input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0/input5
device: 'event5': device_add
PM: Adding info for No Bus:event5
rc0: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:12.2/usb1/1-2/rc/rc0
device: 'mice': device_add
PM: Adding info for No Bus:mice
device: 'mouse0': device_add
PM: Adding info for No Bus:mouse0
device: 'psaux': device_add
PM: Adding info for No Bus:psaux
mousedev: PS/2 mouse device common for all mice
[drm] fb mappable at 0xD0474000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
device: 'fb0': device_add
PM: Adding info for No Bus:fb0
fbcon: radeondrmfb (fb0) is primary device
device: 'vtcon1': device_add
PM: Adding info for No Bus:vtcon1
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR SANYO protocol handler initialized
IR NEC protocol handler initialized
IR Sony protocol handler initialized
device: 'input6': device_add
PM: Adding info for No Bus:input6
input: MCE IR Keyboard/Mouse (smsmdtv) as /devices/virtual/input/input6
device: 'event6': device_add
PM: Adding info for No Bus:event6
device: 'mouse1': device_add
PM: Adding info for No Bus:mouse1
IR MCE Keyboard/mouse protocol handler initialized
device class 'lirc': registering
lirc_dev: IR Remote Control driver registered, major 249
IR JVC protocol handler initialized
DVB: registering new adapter (Hauppauge WinTV MiniStick)
device: 'dvb0.demux0': device_add
PM: Adding info for No Bus:dvb0.demux0
device: 'dvb0.dvr0': device_add
PM: Adding info for No Bus:dvb0.dvr0
usb 1-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
device: 'dvb0.frontend0': device_add
PM: Adding info for No Bus:dvb0.frontend0
driver: '1-2:1.0': driver_bound: bound to device 'smsusb'
bus: 'usb': really_probe: bound device 1-2:1.0 to driver smsusb
usbcore: registered new interface driver smsusb
device: 'lirc0': device_add
PM: Adding info for No Bus:lirc0
rc rc0: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0
IR LIRC bridge handler initialized
Console: switching to colour frame buffer device 240x67
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:03:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:03:00.0 on minor 0
driver: '0000:03:00.0': driver_bound: bound to device 'radeon'
bus: 'pci': really_probe: bound device 0000:03:00.0 to driver radeon
bus: 'usb': add driver dvb_usb_az6027
bus: 'usb': driver_probe_device: matched device 2-2:1.0 with driver dvb_usb_az6027
bus: 'usb': really_probe: probing driver dvb_usb_az6027 with device 2-2:1.0
dvb_usb_az6027 2-2:1.0: no default pinctrl state
dvb_usb_az6027 2-2:1.0: usb_probe_interface
dvb_usb_az6027 2-2:1.0: usb_probe_interface - got id
dvb-usb: found a 'Technisat SkyStar USB 2 HD CI' in warm state.
device: 'i2c-9': device_add
bus: 'i2c': add device i2c-9
PM: Adding info for i2c:i2c-9
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technisat SkyStar USB 2 HD CI)
device: 'dvb1.demux0': device_add
PM: Adding info for No Bus:dvb1.demux0
device: 'dvb1.dvr0': device_add
PM: Adding info for No Bus:dvb1.dvr0
device: 'dvb1.net0': device_add
PM: Adding info for No Bus:dvb1.net0
device: '8:3-fuseblk': device_add
PM: Adding info for No Bus:8:3-fuseblk
systemd-journald[124]: Received request to flush runtime journal from PID 1
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
device: 'dvb1.ca0': device_add
PM: Adding info for No Bus:dvb1.ca0
usb 2-2: DVB: registering adapter 1 frontend 0 (STB0899 Multistandard)...
device: 'dvb1.frontend0': device_add
PM: Adding info for No Bus:dvb1.frontend0
device: 'input7': device_add
PM: Adding info for No Bus:input7
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb2/2-2/input/input7
device: 'event7': device_add
PM: Adding info for No Bus:event7
dvb-usb: schedule remote query interval to 400 msecs.
dvb-usb: Technisat SkyStar USB 2 HD CI successfully initialized and connected.
driver: '2-2:1.0': driver_bound: bound to device 'dvb_usb_az6027'
bus: 'usb': really_probe: bound device 2-2:1.0 to driver dvb_usb_az6027
usbcore: registered new interface driver dvb_usb_az6027
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
device: 'vcs2': device_add
PM: Adding info for No Bus:vcs2
device: 'vcsa2': device_add
PM: Adding info for No Bus:vcsa2
device: 'vcs3': device_add
PM: Adding info for No Bus:vcs3
device: 'vcsa3': device_add
PM: Adding info for No Bus:vcsa3
device: 'vcs4': device_add
PM: Adding info for No Bus:vcs4
device: 'vcsa4': device_add
PM: Adding info for No Bus:vcsa4
device: 'vcs5': device_add
PM: Adding info for No Bus:vcs5
device: 'vcsa5': device_add
PM: Adding info for No Bus:vcsa5
device: 'vcs6': device_add
PM: Adding info for No Bus:vcs6
device: 'vcsa6': device_add
PM: Adding info for No Bus:vcsa6
NET: Registered protocol family 17
device: 'vcs7': device_add
PM: Adding info for No Bus:vcs7
device: 'vcsa7': device_add
PM: Adding info for No Bus:vcsa7
type=1006 audit(1391621088.073:2): pid=364 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
type=1006 audit(1391621088.167:3): pid=415 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
device: 'lo': device_add
PM: Adding info for No Bus:lo
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.